Call at +17759004070

Leave a message Gia@tmaxlaboratory.com

banner
Products
Home Lithium Battery Machine Battery Manufacturing Line

Cylindrical Cell Manufacturing

Fully Automatic Winding Machine for Lithium Cylindrical Cell Making

Fully Automatic Winding Machine for Lithium Cylindrical Cell Making

Sales Manager: Gia

Email: Gia@tmaxlaboratory.com

Wechat: Dingqiuna



  • Item No.:

    TMAX-KL3-20-70
  • Payment:

    L/C, T/T, Western Union, Credit Cards, Paypal
  • Product origin:

    China
  • Shipping port:

    Xiamen Port
  • Lead Time:

    5 Days
  • Certificate:

    CE, IOS, ROHS, SGS, UL Certificate
  • Warranty:

    Two years limited warranty with lifetime technical support
Product Details

Fully Automatic Winding Machine for Lithium Cylindrical Cell Making



1. Device Description

The equipment is used for the production of cylindrical lithium-ion battery cells and is one of the key equipment for battery production. The working process is roughly as follows: after the active unwinding, the positive and negative pole pieces and diaphragms made by the film making mechanism go through tension control, dust removal, process deviation correction, iron removal, diaphragm electrostatic removal, quality monitoring and other operations, and enter the winding part under the guidance of the guide wheel and pole piece guide mechanism. After the winding production is completed, the electric core is removed by the manipulator for short-circuit detection, and is sent to the collection platform by the conveyor belt after photoelectric counting. If nonconforming products are detected during the manufacturing process, they will be removed and entered into the nonconforming product collection box during the transportation process.


2. Incoming Material Requirements

2.1 Positive and Negative Plates
1) Tolerance of Wide Slitting
A: Within 0.1mm

Deviation of Coating Width Direction

Thickness: Within 3%


2) Waveform, Bending, Warping

No waveform (Refers to the defect of the end face);
Warping (After cutting, the pole piece of the cutting part curls);
Serpentine Error: The serpentine error of the length of the pole piece unit is less than 0.3mm/1m.
3) Red or green and other obvious color tapes shall be used for tape connection to facilitate
detection, and a single roll shall be discharged at the winding place.
4) Final Marking: The signal used up as the material of the original reel and the uncoated part

of the terminal are more than 1m.


2.2 Isolating Membrane
1) Slitting Width Tolerance: ± 0.05mm
2) Visual judgment of waveform, bending and skirt shape is excluded.

3) Final Marking: The final mark can be marked in green or black for the signal of exhaustion


3. Technical Specifications and Functions

3.1 Applicable Material Specifications

Width range of electrode piece (excluding tab)

9-80mm

Exposed length of tab

8-25mm

Length of electrode piece unit

150- 1500mm

Electrode piece unwinding diameter

φ400mm

Needle diameter

1.8-6mm(Equipped with 3mm diameter needle for the first time)

Unwinding diameter of separator

φ300mm

Separator width range

10-75mm

Winding diameter

φ6mm-φ20mm

Inner diameter of unwinding core

φ76.2mm

Termination tape

Winding the battery for half a cycle to a cycle and a half

Termination tape width

20-60mm

Inner diameter of winding core of terminating tape

76.2mm

4. Technical Parameters of Equipment

Electrode Piece Cutting BurrTransverse cutting burr is less than 30 μ mLongitudinal cutting burr is less than 15 μ m. 

Cell Alignment  Positive / negative plate: ≤± 0.5 

Negative plate / diaphragm: ≤± 0.5

Diameter ofjelly roll: ≤± 0.20mm

Pass rate: ≥ 99.0%    

The ratio of the number of good products to the total number of production (Eliminate the defects caused by non equipment reasons)

Operation Rate: ≥ 95%    Ratio of actual production quantity to theoretical production quantity (Excluding downtime caused by non equipment reasons).

Productivity:  (φ 10) 5- 12ppm /250mm long electrode piece

Working tension of positive and negative plates: 20N adjustable (Can be set manually and directly on the touch screen)

Diaphragm working tension: 18N adjustable (It can be set manually and directly on the touch screen)  


 5. Equipment installation and commissioning instructions

Air supply pressure: 0.5mpa   Air demand flow: 100L/min

Power supplyThree-phase 380V 50Hz

Power10kw

Weight: 2000kg

Ambient temperature: -40 ° ~+45 °

Relative humidity≥ 60%

Overall dimensionL2800mm * H1700mm * W1350mm

Coating colorAccording to customer requirements


Automatic Winding Machine


Cylindrical Cell Production Line


 Tmax CE

 TMAX Partner

CVD furnace


tube furnace


muffle furnace



1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

3 Responsible for the damage during the shipping process, will change the damage part for you for free.


related products
Coating Machine
Battery Electrode Intermittent or Continuous ​Coating Machine For Production Line

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

Cylindrical Cell Production Line
Automatic 14500/18650/21700/26650/32650 Cylindrical Cell Production Line

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

Cylindrical Cell Assembly
18650/21700/26650/32650 Cylindrical Cell Lab Assembly Plant

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

Battery Pack Assembly Plant
Cylindrical Cell Battery Pack Assembly Plant For LiFePo4 Lithium Cylindrical

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

Planetary Vacuum Mixing Machine
30L Planetary Vacuum Mixing Machine for Battery Slurry Preparation

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

Planetary Vacuum Mixing Machine
Heat Continuous Roller Press Machine For Cylindrical Cell Production Line

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

512 battery testing machine
256/512 Channel 5V 3A 5A 6A Lithium Battery Capacity Tester With Energy Regenerative Function

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

Winding Machine
Semi-Automatic Winding Machine for 18650 21700 Cylindrical Cell

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna

© Copyright: 2024 Xiamen Tmax Battery Equipments Limited All Rights Reserved.

IPv6 network supported

top